Snapmaker 2.0 Vibration Compensation Firmware
👋
Dear Snapmaker 2.0 users,
Your feedback on the vibration compensation firmware Open Beta for
2.0 series is important for this project
. This survey will take about 7 minutes.
Survey Deadline: 2024-06-20
Let's begin
Please indicate your machine model.
Snapmaker 2.0 A150
Snapmaker 2.0 A250
Snapmaker 2.0 A250T/F250
Snapmaker 2.0 A350
Snapmaker 2.0 A350T/F350
Please indicate your addons setup when testing with the vibration compensation firmware.
Select all that apply
Installed Quick Swap Kit
Installed Bracing Kit
Without installing both of them
How long have you been using
your Snapmaker 2.0 machine
?
Less than 1 year
1-2 years
2-3 years
3 years or more
Which function did you test with the vibration compensation beta firmware v2.2.0?
Select all that apply
Single Extrusion 3D Printing Module
Dual Extrusion 3D Printing Module
1.6W Laser Module
10W Laser Module
20W Laser Module
40W Laser Module
50W CNC Module
200W CNC Module
What
wall speed
do you typically set for your test prints?
<60mm/s
60-80 mm/s
80-100 mm/s
>100mm/s
What
infill speed
do you typically set for your test prints?
<80mm/s
80-100 mm/s
100-120 mm/s
>120mm/s
What is the average reduction in printing time from your test prints?
0-10%
11-20%
21-30%
>30%
Share photos of your test prints/engraving/cutting works.
Zip multiple files into one for uploading. If the file size is larger than 5MB, please upload the file to a third-party platform (Google Drive or One Drive) and share the link with us.
Link to Files (Optional)
Gcode files, photos, or videos
Do you think that this firmware is ready for public release?
Yes
No
Understood. What is the primary reason you believe it's not ready for public release? And were there any problems encountered during this Open Beta?
Lastly, if you wish to get a
$10/€10
reward, kindly provide your email address below. (Optional)
You will receive the coupon via email on the last Thursday of June.
Submit
Submit